While the hour-resetting process is the same no matter what time it is and what time the clock claims it is, in some cases, you may need to spin the hands quite a few times to get them to the correct time. Once the hour hand is set to equal the number of chimes the clock rings out, turn the minute hand as many times as necessary to reach the correct time, working clockwise only. Allow the clock to chime on the half-hour and hour before proceeding with the minute hand movements.
Start the clock and place it “In beat.” Gently swing the pendulum to one side to start its momentum and initiate the clock’s ticking. To make your clock run faster, unhook the pendulum and slide the pendulum carving up a bit on the pendulum stick; to make the clock run slower, pull the carving down a bit. Copyright 2015 The Clock DepotVisit our Grandfather Clock Store – The Clock Depot – 3400 Westgate Dr – B11, Durham, NC 27707 Call us toll free at 1-866-402-8714 – Retail Store Hours Mon-Fri 10:00-6:00 EST – Call for Saturday hours Clocks at the lowest price allowed and free shipping on most selections The Clock Depot is a factory authorized Howard Miller distributor for all Howard Miller clocks and grandfather clocks.
Someone had staked the minute hand bushing onto the minute hand, making it impossible to adjust the position of the minute hand – that is, to make the minute hand point straight up when the clock cuckoo’ed. Place the minute hand bushing onto the square base of the minute post, with the concave side facing outward toward the minute hand. Unscrew the hand nut enough to loosen the minute hand, position the loose minute hand to point to 12 o’clock, then – while holding the minute hand in place – tighten the hand nut.
Installing the cuckoo clock hands bought from clockworks.com starts with removing the old hands. After the install of the cuckoo clock minute hand we need them to point to the right place. Put the clock up on the wall and turn the minute hand to make the clock cuckoo out the top of the hour.
At Frankenmuth Clock Company, we appreciate the joys that owning a cuckoo clock can bring, and as a result, have come up with a brief troubleshooting guide to provide easy solutions to many problems that may pop up as time goes on. Most clock manufacturers and repair experts recommend an annual oiling, but generally a clock can go 2 to 3 years without an oiling if performed correctly. Any slight movement will impact the effectiveness of your clock’s timekeeping capabilities, so be sure to carefully place the pendulum back onto the clock with minimal vibration.
These instructions apply to older weight-driven cuckoo clocks and quail & cuckoo clocks that do not have a self-synchronizing feature. If cuckoo door does not close: Look inside the back of the clock and make sure the wire which lifts the cuckoo bird’s tail is under the tail, not above it. Most antique cuckoo clocks have heavy weights which will run the clock for years after the oil has gone bad, causing severe wear to pivots and pivot holes.
Table of Contents
how to adjust hour hand on cuckoo clock Related Question:
Can you move the hour hand on a cuckoo clock?
The hour hand may be moved clockwise or counter-clockwise. Press the hour hand at the point it attaches to the clock movement to ensure it is seated completely. Move the minute hand clockwise as many times as needed to get the clock to display the actual time.
How do you adjust the hands on a cuckoo clock?
Using two fingers, one on either side of the hour hand, loosen the hour hand by pulling it outward a bit, then move the loose hour hand so it points to the hour the clock just cuckoo’ed, then press the hour hand down onto the hour shaft so that hand won’t slip.
How do you sync a cuckoo clock?
Cuckoo Synchronization (Method 1): Open the door on the right side of the clock and push in on the vertical wire. The cuckoo will call. Repeat until the cuckoo calls the correct hour or half hour. Close the door.
Which weight goes where on a cuckoo clock?
In both types of clocks, the one weight serves as the clock’s timekeeping function, the second weight controls the cuckoo sound and the bird’s movements. In musical cuckoo clocks, there is a third weight drives the music box. The weights hang on chains underneath the cuckoo clock and slowly drop over time.
Why does the pendulum stop swinging on my cuckoo clock?
Very little energy is used to keep a pendulum swinging, the swing of the pendulum must be evenly divided. If the pendulum swings more to one side than the other then the energy will be lost and the pendulum will stop swinging. That is the most common reason for a pendulum to stop swinging. Try leveling the clock first.
Do cuckoo clocks chime every hour?
The cuckoo call is usually accompanied by the sound of a waterfall and other birds in the background. In musical quartz clocks, the hourly chime is followed by the replay of one of twelve popular melodies (one for each hour).
How do I make my cuckoo clock accurate?
You can gently hold the hour hand near the shaft and turn it clockwise or counter-clockwise so that it correctly indicates the number of hours counted by the cuckoo. Then, using both thumbs, push the hand down on the shaft (back towards the dial) to tighten.
Should I oil my cuckoo clock?
As a general rule, cuckoo clocks should be oiled every two to three years; average wall clocks need to be lubricated every three to five years. Oiling keeps everything running smoothly, so don’t skip it.
Can you turn clock hands backwards?
The truth is, some mechanical clocks cannot be set backwards, but most actually can! So why is this such a common misconception? Many of the American clocks made around the turn of the century were the kind that you can’t turn backwards.
How do you change the speed of a mantle clock?
To slow down the clock, loosen the adjustment nut (turn it toward your left). The bob will settle lower, making the effective length of the pendulum longer. The clock will run slower. To speed up the clock, tighten the nut (turn it toward your right).
Are all the weights the same on a cuckoo clock?
Cuckoo Clock Weights Weights come in a variety of sizes. Most common are 275 gram weights for 1-day cuckoos, and 1000 (or more) gram weights for 8-day clocks. But this varies. For example, a heavier weight for a 1-day will provide more oomph to power a clock with several animated characters.
How do I know if my cuckoo clock is 1 day or 8 day?
There are basically two types of movements for cuckoo clocks. The eight-day movement needs to be wound only once a week. You can recognize a clock with eight-day movement by the larger pine cones (weights). A cuckoo clock with one-day movement runs for about 30 hours before you have to wind it again.