If your grandfather clock is not striking exactly on the hour and the deviation is less than 15 minutes, you may adjust the minute hand to get it as close as you wish to an exact hour strike. Adjusting the minute hand chime sync on your grandfather clock. With your other hand, turn the Grandfather Clock hand forward or backward the distance necessary to chime at the correct time.
The usually happens when an hour hand is moved by mistake when re-setting the time on your grandfather clock. Sometimes if a grandfather clock is allowed to wind down so the weights are on the bottom and the grandfather clock pendulum stops, this can happen. Should you have other problems with your grandfather clock and wish to replace it, consider a new grandfather clock from The Clock Depot, grandfather clocks.
HOW TO ADJUST AN ANTIQUE CLOCK Mechanical clocks are inherently inaccurate and therefore cannot be compared to electronic clocks. We have created the video below showing how to adjust a clocks beat. There you will find numerous tutorials covering topics like how to remove a clock’s movement from the case, how to remove a clock’s dial, and how to adjust a clock’s beat.
Table of Contents
how to adjust the hour hand on a grandfather clock Related Question:
Can you move the hour hand on a grandfather clock?
The HOUR HAND ONLY can be moved forwards or backwards without any problem. If the clock is striking the wrong hour, you can simply rotate the HOUR HAND in either direction to the correct hour the clock is chiming. Here is an example.
Why does my grandfather clock not chime on the hour?
If your grandfather clock is not striking exactly on the hour and the deviation is less than 15 minutes, you may adjust the minute hand to get it as close as you wish to an exact hour strike. You may have to do this several times to get it right as it is a trial and error method.
Can you turn clock hands backwards?
The truth is, some mechanical clocks cannot be set backwards, but most actually can! So why is this such a common misconception? Many of the American clocks made around the turn of the century were the kind that you can’t turn backwards.
How do you fix a grandfather clock wound to tight?
Strike weight stuck With some cloth gloves on, or at least a cloth of some kind, pull down on the weight some. Again, this is the same as making the weight weigh more. Doing this will make the clock strike. Advance the minute hand and let it chime each quarter until it plays the top of the hour song.
How do you adjust the chimes on a grandfather clock?
If you need to make adjustments, you can do so by way of a small screw located under the pendulum. Turn it left to slow the clock down or right to speed it up. Use tiny adjustments over time. Wait at least a day after each adjustment to evaluate the clock’s performance before making further change.
How do you reset a grandfather clock?
Most grandfather clocks play a melody and chime on the hour. In order to set the time without playing the melody, move the minute hand counterclockwise. Winding the minute hand 1 full rotation counterclockwise will set the clock back by 1 hour.
Which way do you wind a grandfather clock?
To wind the clock simply place the key, or crank, into the winding point and turn clockwise sixteen revolutions. When the clock is fully wound an internal mechanism will prevent you from winding any further.
