An authentic Black Forest cuckoo clock has many parts, from the brass pine cone weights to the hand carved dancing figurines to the mechanics that make it sing, “Cuckoo!” You’ve probably spent a considerable amount of time choosing the perfect cuckoo clock for your home, so whether you are moving a cuckoo clock to a new home or shipping a cuckoo clock to a service station for repairs, there are certain steps you should take to ensure the clock arrives undamaged. HOW TO SHIP A CUCKOO CLOCK. Shipping a cuckoo clock can be nerve-racking, especially if it is an authentic Black Forest cuckoo clock with thousands of dollars of beautifully detailed handmade parts. Whether you are moving a cuckoo clock to a new home or shipping a cuckoo clock to a repair shop, follow these simple steps to ensure your clock arrives safe and sound.
Place wrapped clock into a small cardboard packing box. Have another larger cardboard packing box on hand, with about three inches of space on all four sides of the clock. Gently shake the box to let the peanuts settle around the edges, then add another layer of packing paper on top of the clock.
To keep tension on the chains, attach a rubber band to each of the round brass washers on the ends of the chains and hook the other ends of the rubberbands to the clock to keep the chains taut. If returning your clock to a clock service center for repairs, send the clock without the weights and headboard. Copyright 2015 The Clock DepotVisit our Grandfather Clock Store – The Clock Depot – 3400 Westgate Dr – B11, Durham, NC 27707 Call us toll free at 1-866-402-8714 – Retail Store Hours Mon-Fri 10:00-6:00 EST – Call for Saturday hours Clocks at the lowest price allowed and free shipping on most selections The Clock Depot is a factory authorized Howard Miller distributor for all Howard Miller clocks and grandfather clocks.
REMOVE DECORATIVE PARTS. Pull the chains to bring the pinecone weights to the bottom of the cuckoo clock. If you are not sure how to transport a grandfather clock, you’d better keep it in an upright position during transit. HANGING A CUCKOO CLOCK AT THE PROPER HEIGHT: The best answer is to set your anchor between 6 1/2 and a 7 feet depending on the height of the clock and whether or not you mind having a few inches of chain on the floor when your clock is fully wound.
Put the clock and pendulum into a bubble pack wrap or heavy paper wrap and place them in a box. If you do not feel you can pack your clock properly, Mail Boxes Etc. provides a low cost, guaranteed packaging service. Then ship your clock to The Cuckoo Clockologist as per instructions.
Table of Contents
how to pack and ship a cuckoo clock Related Question:
How do you pack an old clock?
Wrap the clock in a sheet of plastic or a heavy-duty plastic bag if you will be using loose packing material such as Styrofoam peanuts. This keeps pieces of packaging out of the clock mechanism.
How much does it cost to ship a clock?
Peer-to-peer shipping costs can vary and are often negotiable. Typically, it will cost between $300-$1,300 or more to ship your grandfather clock using peer-to-peer shipping services, depending on the size, age, and value of your clock and whether you need any additional services, such as packing or loading.
How do you secure a cuckoo clock?
ANCHORING YOUR CUCKOO CLOCK TO A STUD: Hanging a clock by anchoring it directly into a stud is the best and most secure way to mount your cuckoo clock It is generally recommended that you use a screw with a minimum of 2 inches in length for going through the drywall and into a stud.
How do I ship an old mantle clock?
Fit the wrapped item snugly in a strong cardboard box. Back fill with Styrofoam peanuts if necessary to keep the item snug. Seal box with clear adhesive shipping tape. Use plenty of tape on all seams.
How do you protect clock hands for shipping?
Protect The Exposed Hand Shaft: Hold them in place with a rubber band around the clock. Just make sure that the cardboard tubes, or Styrofoam blocks are ¾” or more inches higher (or thicker) than the end of the hand shaft they protect.
Do you stop pendulum to wind clock?
Can I wind my clock when the pendulum is moving, or should I stop it before winding? You can wind your clock when the pendulum is moving. It doesn’t matter either way. I accidentally moved the hour hand on my clock, and now it won’t keep correct time.
How do you pack a grandfather clock for moving?
For extra protection, we suggest taking a large moving box with both the top and bottom ends open; then sliding it from the top of the Grandfather Clock to its middle. This should protect the Grandfather Clock on all four sides. If you prefer, you can pack the clock inside of a moving crate instead.
How much is a grandmother clock worth?
How much is a grandmother clock worth? Just like other antiques, the value of grandmother clocks differs. These antiques could sell between $250 and $5,000. You will find that some markets would price them for $2,500, while in other markets, you could get them for $100.
What is the difference between a grandfather and a grandmother clock?
What is the difference between a grandmother and a grandfather clock? Both grandmother and grandfather clocks are long case pendulum clocks, but grandfather clocks are generally taller than grandmother clocks, measuring in between 6 and 7 feet, while grandmother clocks typically measure between 5 and 6 feet.
What is the side door on a cuckoo clock for?
The arm that pushes the arm to make the bird come out, may need to get bent inward some. This may be tricky to see or get to, but sometimes there is a small side door on the side of the cuckoo clock case that can open and see this wire, or arm, that pushes the arm that connects to the bird.
How high should you hang a cuckoo clock?
Please note that a cuckoo clock, because of the chains, needs to hang 1,8 -2,0 meters (6-7 feet) above the floor. This height is necessary to give maximum extension to the chains. Use a strong srew with a plug and fix it with a small angle into the wall.
Why does the pendulum stop swinging on my cuckoo clock?
Very little energy is used to keep a pendulum swinging, the swing of the pendulum must be evenly divided. If the pendulum swings more to one side than the other then the energy will be lost and the pendulum will stop swinging. That is the most common reason for a pendulum to stop swinging. Try leveling the clock first.
Does a grandfather clock have to be level?
Grandfather clocks need to be leveled from front-to-back and side-to-side in order for the clock to operate properly. Some grandfather clock cases have adjustable feet in each corner, while others do not.
How much are Tempus Fugit clocks worth?
These clock usually show a retail price of over $500.00, but actually should sale for about $200.00 or less. We purchased on of these clocks to evaluate and they do look like the images we saw on the web, but much smaller as the bases are really small.
What can I do with an old grandfather clock?
Repurposed Grandfather’s Clocks You can re-paint the clock or add some pattern to it to make it more eye-catching. You can also repurpose the clock, for example, a living room can be completed with a shelf made of a grandfather’s clock – paint it, add colorful wallpaper inside and maybe some drawers.